Nissan and FOOD REBORN develop pineapple leaf fibre composite bonnet
Nissan and Japanese company FOOD REBORN have developed a plastic body panel reinforced with fibre extracted from pineapple leaves. Presented as a bonnet, the material adds a new feedstock to the range of natural-fibre composites, with Nissan also licensing the processing know-how to its partner.
From agricultural by-product to body panel
The development centres on a production process in which fibre extracted from pineapple leaves is made into flat yarn, woven into fabric and then used to reinforce plastic. Nissan describes it as the world’s first automotive exterior panel made with pineapple leaf fibre. The company also claims a first for the process described for turning the fibre into yarn and reinforcing fabric.
Nissan has licensed FOOD REBORN the know-how to manufacture flat yarn, fabric and resin-preimpregnated moulding material, or prepreg. This allows its partner to use the technology, but licensing alone does not confirm the start of large-scale production. No specific production car model, price or European launch plan has been announced.
Material: pineapple leaf fibre-reinforced plastic, or NFRP, presented as a bonnet.
Production process: the fibre is made into flat yarn, woven fabric and resin-preimpregnated moulding material.
According to Nissan’s internal tests, the material’s tensile strength exceeds that of conventional flax fibre-based materials; no figures have been published.
Nissan has licensed the production know-how to FOOD REBORN.
The body panel is scheduled to be presented in Tokyo on 18–20 November 2026.
Initial goal is a material that meets racing requirements
Nissan links the development to the need to broaden the range of natural-fibre composites used in motorsport. According to the company, the rules of some production-based racing classes require sustainable natural-fibre-reinforced plastics to be used in modified exterior panels, but the limited number of specialist suppliers constrains security of supply and increases costs.
According to the manufacturer’s internal tests, the new composite has greater tensile strength than conventional flax fibre-based materials. However, no tensile strength figure, test standard or precise composition of the reference material has been published. It is therefore not possible to conclude that it outperforms any particular competitor’s composite. The bonnet’s weight, production cost and a quantified life-cycle assessment are also unavailable, leaving no basis for assessing any advantage in weight, price or environmental impact.
Flax fibre exterior panels have already been used
Natural-fibre car body panels in general are not new. A close comparison is the Porsche 718 Cayman GT4 Clubsport MR, for which flax fibre composite exterior parts, including bonnets and wings, were developed in 2020. Porsche used vacuum infusion to manufacture them, along with Bcomp’s powerRibs technology to meet stiffness requirements. Nissan’s distinctive step is therefore the introduction of pineapple leaf fibre and its processing method, rather than the first use of natural fibre in automotive exterior panels. Porsche’s project at the time envisaged a race test at the Nürburgring 24 Hours; this does not confirm that the parts package is currently available.
BMW provides context for industrial adoption, having announced in August 2025 that flax fibre composites developed with Bcomp were ready for series production. According to BMW, they also meet vehicle homologation requirements for roof structures, but the announcement concerned future BMW M products, not equipment available for sale on a specific model variant. The comparison shows that natural-fibre composites are being developed to meet production car requirements as well as those of racing; these announcements do not provide a basis for ranking the different materials by strength or price.
Public presentation to take place in Tokyo
Nissan and FOOD REBORN plan to show the new body panel at the SAMPE Japan Advanced Materials Technology Exhibition, taking place at the Tokyo Big Sight exhibition centre on 18–20 November 2026.
Nissan supports the feedstock’s potential with an estimate that more than 50 million tonnes of pineapple leaves go unused worldwide each year. The company’s calculation is based on the United Nations Food and Agriculture Organization’s global pineapple production data for 2024. The new process could put some of this by-product to use as a material, but the companies have not yet announced actual production volumes.