Advertisement

Mercedes-Benz brings new driver assistance to German city streets, but drivers must remain alert

Mercedes-Benz C-class
Fullscreen image

Mercedes-Benz will begin rolling out MB.DRIVE ASSIST PRO, a driver assistance system capable of navigating urban traffic, in Germany later this year. Based on NVIDIA technology, it can follow a navigation route, change lanes, turn at junctions and respond to traffic lights. Customers in Stuttgart and Munich will be the first to try it, with wider sales beginning in the first half of 2027. It remains far from fully autonomous driving, however, as drivers retain full responsibility.

Advertisement

The car takes on more tasks in urban traffic

According to a Mercedes-Benz press release published on 21 October, MB.DRIVE ASSIST PRO will become Germany’s first driver assistance system of its kind to combine navigation through urban traffic with partially automated driving.

Whereas existing driver assistance systems focus mainly on motorways, the new system supports the driver throughout the navigation route. The electronics help select the correct lane, merge into traffic, make turns, stop at traffic lights and move off when the light turns green.

The driver must first activate navigation and then press a button on the steering wheel. The system also allows steering corrections without disengaging driver assistance.

It is important to understand, however, that this is not a true autopilot. MB.DRIVE ASSIST PRO meets SAE Level 2 automation requirements, meaning the driver must constantly monitor traffic and be ready to intervene immediately.

Mercedes may promise driving from the starting point to the destination, but the electronics do not relieve the driver of responsibility. This distinguishes the system from Level 3 automated driving, in which the car can temporarily take over the entire driving task under specific conditions.

NVIDIA and 27 sensors monitor traffic conditions

MB.DRIVE ASSIST PRO uses a total of 27 sensors: ten cameras, five radars and twelve ultrasonic sensors.

Data from the sensors is fed to a high-performance computer with a theoretical processing capacity of up to 254 TOPS, or 254 trillion operations per second.

The system is based on Mercedes-Benz’s MB.OS operating system, NVIDIA’s Hyperion computing and sensor architecture, Halos safety software and the Alpamayo software platform.

With this hardware, the car must be able to interpret far more complex situations than conventional adaptive cruise control. Urban traffic adds pedestrians, cyclists, junctions, temporary traffic arrangements and vehicles whose movements are not always easy to predict.

Neither the number of sensors nor the processing power guarantees error-free behaviour, however. The system’s real value will depend on how reliably the electronics can handle complex traffic situations and how rarely the driver needs to intervene.

Mercedes dropped higher-level automation, but not its development

The introduction of the new system marks a significant shift in Mercedes-Benz’s driver assistance strategy.

Advertisement

The company previously offered the Level 3 DRIVE PILOT system for the S-Class and EQS. Under certain conditions, it allowed driving at up to 95 km/h on German motorways without constantly monitoring traffic.

At the start of the year, Mercedes decided to leave DRIVE PILOT out of the updated S-Class and drop it from the forthcoming updated EQS as well. The manufacturer is nevertheless continuing to develop the Level 3 system, aiming to broaden its operating conditions in the future.

MB.DRIVE ASSIST PRO approaches the problem from a different direction. Drivers must still monitor traffic, but the system can assist them in a much wider range of situations, including on city streets.

In everyday use, this could prove more practical than a higher-level automated system whose operation depends on very precisely defined conditions.

The first customers will receive the system at the end of the year

Mercedes-Benz will begin a limited rollout of MB.DRIVE ASSIST PRO in Stuttgart and Munich at the end of 2026. The company will select customers for the pilot programme whose cars already have the necessary hardware and activate the function through a software update.

From the first half of 2027, customers in Germany will be able to order the system officially. Mercedes intends to extend its availability gradually to various passenger cars and vans.

The manufacturer has not yet published a full list of compatible models or a price for the system. Mercedes does, however, promise to offer a one-month free trial.

The technology could reach other parts of Europe

The legal basis for introducing MB.DRIVE ASSIST PRO is provided by United Nations Economic Commission for Europe regulation UN R171, which defines technical and safety requirements for advanced driver assistance systems.

The harmonised regulation will allow Mercedes to extend the system to other European Union countries in the future without requiring separate type approval.

The technology could therefore reach more European roads, although local launch timing remains unconfirmed.

The German launch is therefore an important step for Europe as a whole. Mercedes-Benz will be able to offer technology already introduced in China in its home market too, and broaden competition in driver assistance systems.

A final assessment must nevertheless await independent road tests. Electronics that work smoothly in urban traffic could reduce the driver’s workload, but only if the person behind the wheel does not have to keep correcting the system’s mistakes.